Key Features for ColorView III |
 |
 Resolution: 2576 x 1932 pixels
Binning: 2x, 4x, 6x
Dynamic range: 3 x 12bits
Exposure time: 1ms – 160 sec
Frame rate: > 19 fps @ 6x binning
Cooling: Peltier cooled |
 Back to main page |
 Print |
 |
Camera control
All camera functions are fully operable via the analySIS image-analytical software. No matter what the actual acquisition conditions, real-time functions ensure that the entire dynamic range is exploited. This ensures optimally balanced contrast and superior image quality. The ColorView III's full integration into the analySIS software provides all capabilities and advantages of Soft Imaging System’s innovative solutions to all challenges of image processing and analysis, ranging from image labelling on to image archiving, report generation and e-mailing and including photo-realistic printouts – all without any need for a darkroom.
|
|
 |
High resolution, several frame rates
2576 x 1932 pixel resolution and exposure time from 1 ms up to 160 s make the ColorView III attractive for users working with applications in the field of material science as well as all areas of biomedicine and life science. This camera supports three different frame rates. The ColorView III supports partial read-out. This mode is for setting an ROI which is smaller than the whole image. |
|
 |
High sensitivity
The highly sensitive CCD elements make it possible to detect even very weak signals. The electronic shutter offers exposure times ranging up to 160 seconds. The ColorView III offers exposure times ranging from 1 Ms to 160 sec. A highly efficient read-out technology (Correlated Double Sampling) in conjunction with Peltier cooling of the chip provides images with an optimal signal-to-noise ratio. Chip temperature is maintained at 10° C via Peltier elements. This causes very low noise, which in turn means that greater detail is visible.
|
|
 |
Easy installation
FireWire™ technology guarantees that the ColorView III installation is easy on any PC or laptop equipped with a FireWire™ port. The days when you were limited to a frame grabber and just a single camera are history. FireWire™ technology enables you to use multiple cameras on the same PC. The ColorView III can be mounted onto all light microscopes with a C-mount adaptor. Plus, you only need one cable for getting data and power to the PC's FireWire™ port. No more clutter and no 'octopus' of cables getting in your way.
|
|
|
|
|
.gif) |
 |
ColorView III related Application Report |
|
|
|
|
|
